| |
|
 |
|
| |
These
are manually Operated type pumps in which
body of the pumps is used as the reservoir.
On operating the handle piston gets actuated
thus discharging the oil under pressure through
outlet. These pumps are provided with check
valve at suction and the relief valve is provided
to safe Guard the pumps from overloading.
The Models are given below :- |
|
|
| |
| |
 |
|
| |
MODEL |
|
RESERVOIR |
|
DISCHARGE
|
|
Pr.
SETTING |
|
| |
MLE-HP-250-4 |
|
250ml. |
|
4cc/Stroke |
|
12Kg/cm2
|
|
| |
MLE-HP-600-6 |
|
600ml |
|
6cc/Stroke |
|
15Kg/cm2 |
|
| |
MLE-HP-1700-10 |
|
1700ml. |
|
10cc/Stroke |
|
15Kg/cm2 |
|
| |
MLE-HP-2000-10 |
|
2000ml. |
|
10
cc/Stroke |
|
15Kg/cm2 |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
 |
 |
| |
These
are high pressure pumps meant to compensate
volume/pressure loss of Buffer media
in the thermosyphen system for mechanical
seats. |
|
| |
|
| |
|
| |
 |
|
| |
These are piston type
pumps which are operated by Hydraulic/ pneumatic
pressure. The recommended input pressure in
case of hydraulic system 15-20 bar and pneumatic
system it is 5-7 bars. |
|
|
| |
| |
 |
|
| |
MODEL |
|
DESCRIPTION |
|
| |
MLE-HyP-2000-6 |
|
The
reservoir capacity is 2 Ltr. Discharge/stroke
is 6cc.Input hydraulic pressure is 18Kg/
cm2
Output pressure setting is 15Kg/cm2
|
|
| |
|
|
|
|
| |
MLE-PnP-2000-6 |
|
The
reservoir capacity is 2 Ltr. Discharge/stroke
is 6cc.Input pneumatic pressure is 5Kg/
cm2
Output pressure setting is 15Kg/cm2 |
|
| |
|
|
|
|
| |
In both
the above models float switch for sensing
the minimum oil level is optional. |
|
|
|
| |
 |
| |
| |
The OIL MIST LUBRICATOR
is pneumatically operated system and the input
pressure required is 4-6Kg/cm2 This system
is used for the automatic lubrication of machinery
elements like Gears, Chains, Overheads, Conveyors,
Bearings, Slides, and Live Centers etc.
In the above systems air is fed through air
filter regulator & solenoid valve which
is used as carrying media for oil forced out
from the reservoir. The oil is checked by
the hydraulic solenoid valve. The flow control
valves are provided to control Oil and Ail
flow. The oil is broken in small fragments
by compressed air in the specially designed
atomizer block. An electronic timer is also
provided for intermittent application. The
input power supply 220v.AC/110V.AC as per
requirement. There are different as mentioned
below :- |
|
|
| |
| |
 |
|
| |
MODEL |
|
RESERVOIR
CAPACITY |
|
| |
MLE-OMS-1500 |
|
Reservoir Cap. 1.5 Lts. For single point
|
|
| |
|
|
|
|
| |
MLE-OMS-5000 |
|
Reservoir
Cap. 5.0Lts. Up to 8 Points |
|
| |
|
|
|
|
| |
MLE-OMS-2500 |
|
Reservoir
Cap. 25 Lts. For multi point
|
|
| |
|
|
|
|
|
|
